Hi, Noob would like to know how to fly in apollo3 server?

[cammo500]

Hi im new to online simming and would like to get flyng here but im not sure what software i need. I have teamspeak and i just about know how to work that, any help with the other stuff is greatfully recieved. Thanks, Cam!

[L. D. James]

Teamspeak is what you would use to talk to the other pilots. The client software to connect to the server is fsinn1.2. To install this version properly you have to have the right version of FSCopilot. FSCopilot must be installed first, then FSInn installed second.

You can grab the pilot client at the links below:

FSInn1.2 http://www.apollo3.com/download/download.php?id=29
FSCopilot1.6 http://www.apollo3.com/download/download.php?id=28

To set it up for the Apollo III Server:

In Flight Simulator menu, click on Copilot --> Set --> Network --> [Click on one of the NetX options] --> [Fill in the following options ]:

ID: 222222
Password: password
Net Specific Callsign: (Your Choosing)
Net Label: Apollo
Server: www.apollo3.com
Voice TS VA mode: Selected

--> [Go back to the FSInn Control Panel] --> Click on Apollo.

From there you're logged on. If there are other pilots close to you, you'll be able to see them online.

-- L. James

--------------
L. D. James
ljames@apollo3.com
www.apollo3.com

[bursco]

A friend and I are trying to talk to each other on T/S and cannot succeed - how do we use your server to talk - it is all set up on both as per your forum answer above.
What do we do in simple lang to talk. We can use comm1 to talk - but would like to talk completely private.
I know you did not write FSInn etc but we have found it most daunting to use - wish there was a complete noob version - have tried FAQ at mcdu but even those are "hard work" to digest.
Sry to ramble - thanks in advance

[L. D. James]

Private voice isn't available on Apollo III.

-- L. James

--------------
L. D. James
ljames@apollo3.com
www.apollo3.com/~ljames